Tender For annual repair and maintenance of to various road under pwd division south east road-2 during 2026-27 (sh- providing manholes and bell mouth on mb road of sub division 24 under south east road 2)
Tender For repair / replacement of internal unserviceable point wiring / fitting / fixture and connected accessories work in karam singh enclave and bana singh enclave under age e&m-iv of ge (south) bathinda at bathinda mil stn - taking down carefully existing copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, bell pushes, ceiling roses, pendants, regulators, sockets, light fitting, call bells etc. removing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. to match existing colour complete all as specified and directed., material and labour for concealed one light / fan point controlled by one, one way modular switch 06 amp wiring with 1.5 sq mm nominal cross sectional area, single core, 1100 volt grade, multi-stranded, pvc insulated, unsheathed frls copper conductor cable with and including continuous earth wire of size 1.5 sq mm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, pvc insulated, unsheathed, frlsh copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic pvc conduit of 20 mm dia in medium grade complete with and including all pvc conduit accessories concealed into wall by cutting of chases in wall complete and including modular metal flush boxes not less than 1.6mm thick alongwith modular cover plate with frame of any size for mounting of any type modular switches/sockets/bell switch /fan regulator and brass screws, cup washers etc complete, making good the distributed surfaces completely matched and finished with existing surface including painting of walls etc complete all as specified and directed. , all as per srl item no. 2.00 (here-in-before) but one 3 pin socket outlet 6 amp on same board point, complete all as specified and directed, all as per srl item no. 2.00 (here-in-before) but one 3 pin socket outlet 6 amp on the independent board point with pvc fr-lsh cable size 2.5 sqmm complete all as specified and directed., all as per srl item no. 2.00 (here-in-before) but one bell point controlled by one bell push on independent board complete all as specified and directed., all as per srl item no. 2.00 (here-in-before) but one light point controlled by two way switch complete all as specified and directed., all as per srl item no. 2.00 (here-in-before) but for 15/16 amp socket out let/power point by using 2.5 sqmm pvc insulated unsheathed copper conductor cable fr-lsh multi strand on independent board including provn of 2.5 sqmm unsheathed, multi stranded copper conductor cable fr-lsh continues as earth wire connected to earth dolly etc complete all as specified and directed, all as per srl item no. 2.00 (here-in-before) but for 15/16 power point (ac & geysers) by using 4.0 sqmm pvc insulated unsheathed copper conductor cable fr-lsh multi strand on independent board including provn of 4.0 sqmm unsheathed, multi stranded copper conductor cable fr-lsh continues as earth wire connected to earth dolly etc complete all as specified and directed, material and labour for one light / fan point controlled by one, one way modular switch 06 amp wiring with 1.5 sq mm nominal cross sectional area, single core, 1100 volt grade, multi-stranded, pvc insulated, unsheathed frls copper conductor cable with and including continuous earth wire of size 1.5 sq mm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, pvc insulated, unsheathed, frlsh copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and in existing rigid non-metallic pvc conduit including modular metal flush boxes not less than 1.6mm thick alongwith modular cover plate with frame of any size for mounting of any type modular switches/sockets/bell switch /fan regulator
Tender For repair replacement of internal unserviceable point wiring fitting fixture and connected accessories work in tarapore enclave, khetrapal enclave and abdul hamid under age em iv of ge(s) bathinda at bathinda mil stn - taking down carefully existing copper/aluminum point wiring (light,fan, socket or power) complete including fixture and fittings such as switches, bellpushes, ceiling roses, pendents, regulators, sockets, light fitting, call bells etc removing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. to match existing complete all as specified and directed., m & l for point wiring with multi-stranded copper conductor, single core, pvc insulated and unsheathed cable, including pvc insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor to common earth and connected to earth dolly, gi terminal boxes, modular frame & cover plate (suitable for modular switch/sockets) comprising the following: -, one light point controlled by one switch or one fan point controlled by one switch & fan regulator etc. with 1.5 sq. mm (nominal area) cable & 1.5 sq. mm (nominal area) cable as earth continuity conductor, in existing concealed conduit all as specified., one socket outlet three pin, 6 amp, on the same board, with 1.5 sq. mm (nominal area) cable & 1.5 sq. mm (nominal area) cable as earth continuity conductor, all as specified, one socket outlet three pin, 6 amp, independent, with 1.5 sq. mm (nominal area) cable & 1.5 sq. mm (nominal area) cable as earth continuity conductor, in existing concealed conduit all as specified., one bell/buzzer point controlled by one push button with 1.5 sq. mm (nominal area) cable & 1.5 sq. mm (nominal area) cable as earth continuity conductor, in existing concealed conduit all as specified, one light point controlled by two way switch. with 1.5 sq. mm (nominal area) cable & 1.5 sq. mm (nominal area) cable as earth continuity conductor, in existing concealed conduit all as specified., one socket outlet three pin, 5/15 amp, independent, with 2.5 sq. mm (nominal area) cable & 2.5 sq. mm (nominal area) cable as earth continuity conductor, in existing concealed conduit all as specified., one light point controlled by one switch or one fan point controlled by one switch & fan regulator etc. with 1.5 sq. mm (nominal area) cable & 1.5 sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic pvc medium duty concealed conduit all as specified., one socket outlet three pin, 6 amp, on the same board, with 1.5 sq. mm (nominal area) cable & 1.5 sq. mm (nominal area) cable as earth continuity conductor, all as specified., one socket outlet three pin, 6 amp, independent, with 1.5 sq. mm (nominal area) cable & 1.5 sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic pvc medium duty concealed conduit all as specified., one socket outlet three pin, 5/15 amp, independent, with 1.5 sq. mm (nominal area) cable & 1.5 sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic pvc medium duty concealed conduit all as specified., one bell/buzzer point controlled by one push button with 1.5 sq. mm (nominal area) cable & 1.5 sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic pvc heavy duty concealed conduit all as specified., m & l for inverter wiring with multi-stranded copper conductor, single core, pvc insulated and unsheathed cable,one light point /one 5 amp socket point only.including drawn though pvc conduct all as specified and as directed., s&f switch modular type single pole, one way, 6 amp, one module, complete all as specified., s&f switch modular type single pole one way, 16 amp, one module, complete all as spe
Tender For विधुत व्यवस्था एवं विद्युत उपकरण मरम्मत कार्य - electrical system and electrical equipment repair work- philips led bulb 20w , door bell electric, , fan repairing charges, , ac service charges, , ac gas refilling, , ac capacitor, , ac blower motor, , water motor repairing, , tube light philips, , wire per feet 2.5, 1.5, 1, , switch, , fan capacitor, , regulator, , shri pin holder, , two pin holder, , watch electric digital, , watch simple oreva, , extension board 4 switch wire 30 feet, , extension board 6 switch wire 30 feet, , street light new purchase, , street light repair, , ceiling light up to 20 watts, , ceiling light 2 by 2, , stabilizer (for ac)
Tender For annual repair and maintenance of to various roads under pwd division south east road-2 during 2026-27 (sh- providing manholes and bell mouths on various roads of sub division ser-23 under south east road-2).
Tender For supplying various types of electrical materials for electrical repair and maintenance in various municipal properties within the jurisdiction of south zone-a (udhna).- 2 ft celling fan ms pipe, ding dong bell, 3-up pvc modular board surface, 6-up pvc modular board surface, 8-up pvc modular board surface, 12-up pvc modular board surface, 16-up pvc modular board surface, 18-up pvc modular board surface, 3-up modular plate, 6-up modular plate, 8-up modular plate, 12-up modular plate, 16-up modular plate, 18-up modular plate, modular switch 6 amp, modular plug 6 amp, modular plug 16 amp, modular bell push switch, plug type step type hum free regulator for modular, tissino type switch 6 amp (simple), tissino type plug 6 amp (simple) 2 in 1 socket, electronic hum free eme socket type step fan regulator (plug type), electronic hum free eme switch type step fan regulator, one no single pole 16 a switch & one no 6/16 a universal socket combined (ss combine with box), 3 pin top 6a, 25mm medium class rigid pvc pipes(3 mtr), saddle base with screw suitable for 25 mm rigid pvc pipes, pvc casing capping double lock type 12/32 mm (2 mtr.), upvc cable trunking system size 50 mm x 50 mm trunking (2 mtr.), external coupler 20/25/32 mm, internal coupler 20/25/32 mm, elbow 20/25/32 mm, tee 3/4 way 20/25/32 mm, inner/outer 20/25/32 mm, junction 1 way 20/25/32 mm, junction 2 way 20/25/32 mm, junction 3 way 20/25/32 mm, junction 4 way 20/25/32 mm, coupler 20/25/32 mm, 6 mm cable pvc clips (saddle) (100 nos.), 8 mm cable pvc clips (saddle) (100 nos.), khili for wiring (1") (2.5 kg box) (doba khili), black metal screw 19 x 6 mm (1000 nos.), black metal screw 32 x 6 mm (1000 nos.), wooden grip packet, 1 way pvc gang box, 2 way pvc gang box, 4 way pvc gang box, 6 way pvc gang box
Tender For instrument spare and annual maintenance contract - circular charts:-i) cc-200 (fc-261)range 0-100, ii) 9/d/179/fc-241, range 0-600, iii) 9/d/147/s-8963, range 0-150, iv) 9/d/112/s-3452, range 0-30, disposable pen (red), temperature gauge dial size 6" (h guru) heavy duty with test certificate (mercury filed) :-i) range 0-150 c streight steam 6", ii) range- 0-150 c capillary type (3 meter) bulb length 10" copper/pvc, iii)range 0-300 c streight steam 6", iv) range 0-500 c streight steam 6", vacuum gauge dial size 6" range- 0-30 inch of hg/760 mm bottom feed connection 3/8" bsp, h guru heavy duty with test certificate., pressure gauge dial size 6" bottom feed connection size 3/8" or 1/2" bsp, h guru heavy duty with test certificate :-i) range 0-15 psi 01 kg/cm , ii) range 0-30 psi 02 kg/cm , iii) range 0-60 psi 04 kg/cm , iv) range 0-150 psi 10 kg/cm , v) range 0-300 psi 21 kg/cm , vi) range 0-1030 psi 42 kg/cm /70 kg/cm , pressure gauge, dial size 10" bottom feed connection size 1/2" bsp heavy duty with test certificate:-i) range 0-60 kg/cm h. guru with test certificate, ii) range 0-2 kg/cm2 h. guru with test certificate, pressure gauge for turbines heavy duty with test certificate:-i) 4" dial size side back connection %" bsp range 0-2 kg/cm , ii) 4" dial size side back connection %" bsp range 0-4 kg/cm , iii) 4" dial size side back connection %" bsp range 0-7 kg/cm , iv) 4" dial size side back connection %" bsp range 0-10 kg/cm , teflon coated compensating cable 2 core j type, compensating cable fg/ss 2-core k type, 4 digit digital temperature indicator j & k typ , thermocouple sensor heavy duty:-i. 12" x 8 mm j/k type, ii. 8" x 8 mm j/ k type, iii. 6" x 6 mm j/k type, oil pocket ss 12", 6 digit digital event counter, proximity switch (magnetic sensor) pnp-nc sensing 8 mm,voltage 5-35 vdc, max load 300 ma, on/off pneumatic control valve flange type size- 1" to operate at air pressure 60-80 psi suitable for 20 kg/cm line pressure, on/off solenoid valve for pneumatic valve:-a) air filter " line size female thread, b) air filter with air regulator size 4", digital temperature controller (pid) j & k type, digital tachometer range 0-10000 rpm, 96 x 96 with magnetic sensor., steam flow indicator cum totalizer, drum level controller 4-20 ma input/output model no. 5296at (massibus make), dp transmitter 4-20 ma for boiler drum level, honybell make, positioner for drum level control valve, stroke counter for molasses tank, jumbo digital display with sensor, for juice and water tank, current and previous display size 4" x 4"., ma & mv source meter for temp. indicator calibration, pressure transmiter model tsc 01, range 0 to 40 bar, output 04-20 ma, accuracy 0.25% fs, pressure transmiter model ks-e-e-e b02u-m-v, range 0 to 2 bar, output 04-20 ma, supply 9-32 vdc, port g1/4e, syphon pipe s.s. 304 :-(i) u type, (ii) q type, pressure gauge, model en837-1, ss-316, dail size 6", bottom feed connection size 1/2" bsp, heavy duty with test certificate (tempsens make) :-i) range 0-6 kg/cm , ii) range 0-10 kg/cm , iii) range 0-21 kg/cm , iv) range 0-42 kg/cm , pid controller, size 96 96, model no. dc 1040, make honey bell, pressure recorder range, h-guru make, with test certificate (heany duty) with pipe stand mounted ", socket- ", size 10" :-(i) 0-1 kg./cm2, (ii) 0-2 kg./cm2, (iii) 0-10 kg./cm2, orifice with assembly (nipple), inlet pressure 21 kg/cm , outlet pressure 21 kg/cm , inlet temp. 350 c, outlet temp. 350 c, line size 4", drum level transmitter, range 400 to 400 in h2o, (make- honey bell), steam pressure transmitter, range 14.7 to 3000 psi, (make- honey bell), hade mounted thermocouple, length 450 mm, k-type duplex type, with test certificate (heany duty), signal isolator singal input 4-20ma, double output 4-20ma, repair & calibration work with amcsuper-heated wash water temp. controlling system- 01 no., d-super heated exhaust steam temp. controlling system- 01 no., temperature control system of transit heater for c/f machin